|
Heat Tracing Supervisory Software
DigiTrace Supervisor
DigiTrace 200N Supervisor v3.02
|
|
|
DigiTrace SupervisorTM
 |
|
The DigiTrace SupervisorTM (DTS) heat-tracing controller configuration and monitoring software provides a graphical user interface for DigiTraceR communications and controller products. The software supports one or more NGC-30 controllers with Advanced User Interface Terminals, 780 Series/GCC-9000 Group Communications Controllers, DigiTrace T2000 AC 2000+ alarm/communications interface cards, DigiTrace 910/915/920 Heat Trace Controllers and/or legacy DigiTrace Controllers (except the DigiTrace 200N) using the ModBusR protocol.
The software allows the user to configure and monitor, from one central location, any DigiTrace controller which has the appropriate communications interface installed. The software also incorporates advanced features such as data logging and trending, batch and recipe processing, scheduled events, and supports alarm monitoring, with the ability to acknowledge and clear alarms.
DigiTrace Supervisor has full multi-user, multi-server and networking capabilities. Devices can communicate with DigiTrace Supervisor via simple hard-wired serial communications or they can take advantage of existing network infrastructures including Ethernet LANs (Local Area Networks), and Internet-based WANs (Wide Area Networks). Electric Heat-Tracing (EHT) system information can be accessed and managed from almost anywhere in the world, using the latest connectivity technologies. This flexibility can reduce the cost of installing communications to controllers within your facility.
Architectures
While many DTS system architectures are possible, they will generally fall into one of three types, and these in turn will use either MSDE or SQL for their databases.
|
|
Single Master Server, no Slave Servers, Single User (Client)
Single Master Server, no Slave Servers, Multiple Users (Clients)
Single Master Server, one or more Slave Servers, Multiple Users (Clients)
Click here to view feature comparison table
|
 |
DigiTrace 200N SupervisorTM v3.02
 |
|
The software allows the user to communicate with the 200N controller from a personal computer. This program can access information from the 200N system from remote locations to configure the system, get updates, real-time operating information, view events and alarms that have occurred. The software gives the user the ability to acknowledge and clear alarms.
|
|
|
|
