How to Install

Underfloor Heating

Installation Information For:

T2Red	» online	\|	»

T2Red + T2Reflecta	» online	\|	»

T2QuickNet	» online	\|	»

Building Materials Selector

There is more to a warm, renovated floor than only the floor heating system. Besides a quality floor heating system, a well-functioning warm floor also requires careful floor preparation and finishing. This is particularly important for renovation applications – because the sub floor can be anything.

Raychem systems have undergone severe compatibility testing at the leading building material suppliers in Europe. The result is a complete overview of which products can be used in combination with the selected Raychem floor heating system. By using these combinations and following the manufacturers recommendations for installation, you build a safe and long-lasting, warm floor. In general the following steps are required for tile floors:

Apply a primer
(optional) Level out any unevenness using self-leveling material
Install the Raychem floor heating system
(optional) Level out any unevenness using self-leveling material
(optional) Apply a water barrier
Apply a tile adhesive
Lay tiles

Compatible Products
	T2Red	T2Red + T2Reflecta		T2QuickNet
		S-system	FIX-system

	Tyco Thermal Controls Corporate
	Privacy Policy \| About Us \| Tyco Corporate \| Vacancies
	© 1996-2007 Tyco Thermal Controls LLC.
	Copyright and disclaimer notice \| Site map

Select Country

Installation

		Partner's Corner
		News
		Events
		MSDS

Products & Services

	Heat Tracing
	Snow Melting & De-Icing
	Specialty Heating
	Floor Heating
	Temperature Measurement
	Leak Detection
	Fire and Performance Wiring
	Services
x close