Attach the cable (e.g. use glue gun) on the clean floor (or on a grout mesh). Apply a layer of adhesive primer. |
Carefully apply an even layer of filler on top of the cable. Let it cure according to instructions. |
Spread the tile adhesive and then lay out and join the tiles. In wet areas, apply a watertight coating before the tile adhesive. |
All passage areas, corners and angles are sealed with sanitary silicon. Allow the floor to cure completely before turning the floor heating system on.
Notes:
All electrical work must be performed by an authorized electrician.
In general it is to be ensured that only floor coverings which are suitable for floor heating are employed.
|
