The RayClic connection kits are a simple, fast and reliable set of connection
kits developed for select Raychem self-regulating heating cables. There is no
wire stripping needed because the insulation displacement connector makes the
electrical connection. The easy-to-install RayClic connection kits reduce
installation time, lowering the total installed cost of the heating cable
system.
Powered Connection Kits
RayClic-PC Power Connection Kit
A RayClic-PC can supply power to one heating cable. Each kit contains one RayClic-PC power connection, one RayClic-E end seal, and one SB-04 pipe mounting bracket.
RayClic-PS Powered Splice Kit
A RayClic-PS can be used as a power connection kit for supplying power to two heating cables. Each kit contains one RayClic-PS powered splice connection, two RayClic-E end seals, and one SB-04 pipe mounting bracket.
RayClic-PT Powered Tee Kit
A RayClic-PT can be used as a power connection kit for supplying power to three heating cables. Each kit contains one RayClic-PT powered tee connection, three RayClic-E end seals, and one SB-04 pipe mounting bracket.
Unpowered Connection Kits
RayClic-LE Lighted End Seal Kit
Lighted end seal kits are installed wherever an end-of-line signal light is required. Each kit contains one RayClic-LE lighted end seal and one RayClic-SB-04 pipe mounting bracket.
RayClic-S Splice Kit
RayClic-S splice kits are installed as needed to connect two heating cables together at one point. Each kit contains one RayClic-S splice.
RayClic-T Tee Kit
RayClic-T kits are installed as needed to connect three heating cables together at one point. Each kit contains one RayClic-T tee connection and one RayClic-E end seal.
RayClic-X Cross Kit
RayClic-X cross kits are installed as needed to connect four heating cables together at one point. Each kit contains one RayClic-X cross and two RayClic-E end seals.
